With the multi N/C duo, Analytik Jena presents an analyzer that considerably simplifies TOC analysis (Total Organic Carbon). For the first time, it is possible to analyze solid and liquid samples using one single device – highly automated and without complex adjustments.
The new TOC analyzer of modular design can process up to 48 solid samples in less than four hours due to its high degree of automation. With up to 146 samples per sequence and parallel purge and analysis in NPOC operations, the analyzer adds to the highly automated and clean handling of liquid samples. Switching between the solid and liquid mode takes only a few mouse clicks. In order to measure solid matter, the multi N/C duo uses a robust, catalyst-free oxidation technique, which makes a considerable contribution towards reduced running costs. Furthermore, low-wear ceramic components make the combustion system of the analyzer particularly low-maintenance. Solid sample weights in the gram range compensate for the inhomogeneity of samples, thus increasing the reproducibility of the analysis results.
The multi N/C duo is designed particularly for labs in the environmental sector that see themselves confronted with an increasing number of solid and liquid samples. Automation and the high quality of analysis are brought together harmoniously by the device – with additional ease of use for the operator.
Multi N/C 2100S Duo – Whether Solid or Liquid – Robust Automation
The robust routine analyzer based on high-temperature combustion with septum-free injection technology is ideal for particle- or oil-containing water samples as well as very small sample volumes. It has a high degree of automation for both water and solids analysis.
Characteristics of the Multi N/C 2100S Duo:
- Carry-over free direct injection technology
- Suitable for very small sample volumes
- Robust, catalyst-free solids TOC measurement
- Fast switch-over from liquid to solid mode without system conversion
Multi N/C 3100 Duo – Whether Liquid or Solid – Highest Sample Throughput
The fast all-rounder for all samples thanks to a combination of catalytic high-temperature combustion and flow injection with intelligent rinsing and injection technology for particle-containing water samples. Highest sample throughput by parallel purge and analyzing in liquid mode and low sample preparation effort for solids.
Characteristics of the Multi N/C 3100 Duo:
- Flow injection with intelligent rinsing and injection technology for samples containing particles
- High sample throughput by parallel purge and analysis in NPOC mode
- Robust, catalyst-free solids TOC measurement
- Fast switch-over from liquid to solid mode without system conversion
Learn More about the Analytica Jena’s Multi N/C Series here-
https://www.analytik-jena.in/products/sum-parameter-analysis/toctnb-analysis/multi-nc-series/
